Hazardous Area Direct

• Ergonomic design facilitates fatigue-free operation during continuous use
• High-resolution color display can be read under even the most unfavorable light conditions
• Protection from static electricity, water and dust; shockproof housing (non-corroding)

Bluetooth for communication with other Bluetooth devices such as RFID readers, HART modems, GPS receivers, position sensors, headsets and barcode readers

• Online connection via Bluetooth-enabled mobile telephones
• Wireless data synchronization via ActiveSync with PCs*

Integrated WLAN 802.11b

• Access to the Internet, e-mail and company data as well as Voice-over-IP are possible
• WLAN and Bluetooth can be used simultaneously without one affecting the other
• Peer-to-peer communication with other WLAN-enabled units
• Internal antenna

SD slot for greater storage capacity and upgrade capability

• Storage of data, circuit diagrams, programs and backups on SD memory cards
• Support of SDIO cards
• Installation of upgrade cards such as barcode scanners or special account cards, for example.

Optimum security by means of advanced protection for the unit, data and connections

• VPN software ensures advanced security for wireless connections
• WEP encryption with 64 or 128 bits for wireless connections provides increased security for authorized connections and data transfer
• F-Secure FileCrypto data encryption ensures protection from unintended data disclosure
• Supports LEAP, WEP and 802.1x

Rechargeable Lithium-lon battery

• 1800 mAh
• Up to 15 hours uninterrupted power supply

Standard delivery

• Unit, Charger, Operating instructions, Safety instruction, Software CD

1. Flat top panel, optional long top panels for adding barcode or RFID modules available 
2. Wireless LED indicator
   • Off = WiFi or Bluetooth are both off
   • Blue flash = WiFi and / or Bluetooth are on 
3. Charge / Notification LED indicator
   • Off = no charging or no notification
   • Amber flash = charging
   • Green flash = notification events have occured
   • Amber solid = charging complete
4. Touchscreen
5. Power button
6. F4 button (HP indication: iTask button)
7. F3 button (HP indication: Messaging button)
   • Starting iPAQ Wireless, press and hold for two seconds
8. 5 pin charging plug with USB connector (only active with powered charger)
9. Speaker and microphon in / outputs
10. F2 button (HP indication: Contacts button)
    • Starting HP Protect Tools, press and hold for two seconds
11. F1 button (HP indication: Calendar button)
    • Switching Landscape / Portrait mode, press and hold for two seconds
12. 5-Way Navigation button, scrolling through a list or pushing to select (similar to using a joystick)
13. F5 button (HP indication: Record button)
    • Using as trigger button for optional barcode or RFID modules
14. 2 Reset buttons, for Soft Reset press both buttons at the same time
15. serial interface for connecting optional modules*
16. SD card expansion slot*
17. Typ II CF card slot*

    * may not be accessable on certain models

18. Stereo-headphone / headset jack (3,5mm)*
19. IrDA Infrared port
20. Lower socket for optional handstraps or handgrips
21. Two stylus slots*
22. Backcover label, including serial number and device name
23. External socket for connecting external trigger aditional to F5 button
24. Upper socket for optional handstraps or handgrips*
25. Battery slot*

FM vs ATEX Comparison Flow Chart